Auxiliary Function; Drying Degree; Anti-Creasing; Changing The Contrast - Blomberg TKF 7431 User Manual

Selecting a Programme and Operating Your Machine

6.7 Auxiliary function

Audio Warning
Cancel Audio warning
audio warning level 1
Your dryer will give an audio warning when the programme
comes to an end. If you do not want to hear this buzzing
or want to change the volume level, you need to press
the "Volume level" button. No audio warning will be given
when "x" appears on the screen.
C
You can select this function either before
or after the programme starts.

6.8 Drying degree

Used to adjust the required dryness level. More drying
is performed compared to the default settings when "+"
sign appears and less drying is performed when "-" sign
appears. Programme duration can change depending on
the selection.
A
This function must be selected before the
programme starts.

6.9 Anti-creasing

A 2-hour anti creasing programme to prevent laundry from
creasing will be activated if you do not take the laundry out
after the programme is over. This programme rotates the
laundry in 600-second intervals to prevent creasing. Press
"Anti-creasing" button to activate.
Anti-creasing is activated but the programme is running in
the first example above. Drying is over and the first step of
anti-creasing has started in the second example.
Dryer / User Manual
Audio warning Audio warning
level 2 level 3

6.10 Changing the contrast

Contrast can be adjusted in order to make the symbols
on the display appear clearer. It may particularly be
necessary to change the contrast setting of the display
when the dryer is installed over a washing machine.press
and
Press and hold the Spin Speed/Time button for 3
seconds.
When the contrast is changed at the end of 3 seconds, all
symbols on the display will become visible for 3 seconds
in order to indicate that the process is complete.
Perform the same procedure to revert back to the
previous contrast setting.

6.11 Warning indicators

C
Warning indicators may differ according to
the model of your machine.
Filter cleaning
A warning symbol will appear to remind filter cleaning
after the programme finishes.
C
If the filter cleaning symbol flashes
continuously, please refer to "Suggested
solutions for problems".
Water tank
A warning symbol will turn on at the end of the
programme or when the tank is full with water. The
machine stops operating if the warning symbol turns on
when a programme is running. To restart the machine,
please drain the water in the water tank. Press "Start/
Pause/Cancel" button to start the programme after you
have emptied the water tank. The warning symbol turns
off and the programme resumes operating.
Cleaning the condenser
23 / 36 EN