Electrical Connection - Frigidaire FRF55W User Manual

INSTALLATION
4
1
CAUTION!
Reposition, level the appliance, wait
for at least four hours and then
connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the
cabinet.
• The door opens and closes
correctly.
If the ambient temperature is cold (i.e.
in Winter), the gasket may not fit
perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
In case you do not want to carry out
the above mentioned operations,
contact the nearest Authorised Service
Centre. The Authorised Service
specialist will carry out the reversibility
of the doors at your cost.

Electrical Connection

CAUTION!
Any electrical work required to install
this appliance should be carried out by
a qualified electrician or competent
person.
18
This appliance must be earthed.
The manufacturer declines any liability
should these safety measures not be
observed.
The wires in the mains lead are coloured in
2
accordance with the following code:
3
• A - green and yellow: Earth
• C - brown: Live
• D - blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
1. Connect the wire coloured green and
2. Connect the wire coloured blue to the
3. Connect the wire coloured brown to the
4. Check that no cut, or stray strands of
WARNING!
A B
yellow to the terminal marked either
with the letter "E" or by the earth symbol
or coloured green and yellow.
terminal either marked with the letter
"N" or coloured black.
terminal either marked with the "L" or
coloured red.
wire is present and the cord clamp (E)
is secure over the outer sheath.
C
D
E