Operation - Frigidaire FRF55W User Manual

OPERATION

Control panel
1
Green Indicator Light
1
Red Indicator Light
2
Temperature Regulator
3
Switching on
Leave the appliance to stand upright for 4
hours after installation.
Insert the plug into the wall socket.
1. The Green Indicator Light will light up
and remain lit until the appliance is
switched off.
2. Leave to run for 8 hours to allow the
correct temperature to be reached
before placing food inside.
The Red Indicator Light will stay on until
the correct temperature is reached.
3. When the appliance has reached the
set temperature (the Red Indicator Light
has gone out) adjust the Temperature
Regulator according to the quantity of
the stored foods.
6
2
Half Loaded position
4
Full Loaded position
5
A few hours after starting up the Red
Indicator Light will go out to show that
the correct temperature has been
reached for the setting chosen and will
stay out to indicate that everything is in
order. It will come on if the freezer
temperature rises unduly for instance,
after opening the freezer door or
placing food inside the cabinet, but the
light should go out again when the
temperature returns to the correct
storage level.
Switching off
1. To turn off the appliance, disconnect the
mains plug from the wall socket.
2. To disconnect the appliance from the
power, disconnect the mains plug from
the wall socket.
Temperature regulation
The temperature within the appliance is
controlled by the Temperature Regulator
situated on the control panel.
3
5 4