BenQ SW27 series User Manual page 46

Item
Auto Power
Off
Auto Pivot
Resolution
Notice
Custom Key
1
Custom Key
2
Custom Key
3
Controller
Key 1
Controller
Key 2
Controller
Key 3
DDC/CI
46 Navigating the main menu
Sets the time to power off the monitor automatically in
power saving mode.
Sets to rotate the OSD menu with the monitor.
Sets whether to display the resolution notice of the
recommended resolution when a new input source is
detected by the monitor.
Sets the function to be accessed by custom key 1.
Sets the function to be accessed by custom key 2.
Sets the function to be accessed by custom key 3.
Sets the feature or setup menu to be accessed by
Controller Key 1.
Sets the feature or setup menu to be accessed by
Controller Key 2.
Sets the feature or setup menu to be accessed by
Controller Key 3.
Allows the monitor settings to be set through the software
on the PC.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards Association
(VESA). DDC/CI capability allows monitor controls to be sent via
the software for remote diagnostics.
Function Range
•
OFF
•
10 min.
•
20 min.
•
30 min.
•
ON
•
OFF
•
ON
•
OFF
• Brightness
• Contrast
• Input
•
Color Mode
•
Color temp.
•
Gamma
•
Color gamut
•
Standard
•
Adobe RGB
•
sRGB
•
B+W
•
Photo
•
Low Blue Light
•
Calibration 1
•
Calibration 2
•
Custom 1
•
Custom 2
•
ON
•
OFF