Craftsman 315.214770 Operator's Manual page 20

BEFORE LEAVING THE SAW
See Figure 17.
n Wait until the saw has come to a full and complete
stop.
n Place the switch in the OFF position, remove the switch
key from the switch assembly. Store key in a safe
place.
n Unplug the saw from the power source.
n Make workshop childproof.
n Lock the shop.
LOCKING THE SWITCH
See Figure 17.
n Wait until the saw has come to a full and complete
stop.
ON
OFF
n Place the switch in the OFF position, remove the switch
key from the switch assembly. Store key in a safe
place.
TILTING THE TABLE
See Figure 18.
n Loosen the table lock handle slightly.
n Turn the angle adjustment knob, tilting the saw table
toward the front of the saw housing until it reaches the
desired angle.
n Using the scale indicator, check angle markings.
n Retighten the table lock handle to hold saw table securely
in place.
OPERATION
SWITCH
KEY
Fig. 17
SAW
TABLE
TABLE LOCK
HANDLE
SCALE
INDICATOR
USING THE MITER GAUGE
See Figure 19.
The miter gauge can be turned 45° to the right or left.
n Loosen the lock knob on the miter gauge.
n With the miter gauge in the miter gauge slot, rotate the
gauge until the desired angle is reached on the index
scale.
n Retighten the lock knob.
20
0
Fig. 18
LOCK
KNOB
MITER
GAUGE
SLOT
90
MITER
GAUGE
Fig. 19