Earlex HV4500 Operating Manual

Earlex HV4500 Operating Manual

Spraystation

Advertisement

Spraystation® HV4500
Operating Manual
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HV4500 and is the answer not in the manual?

Questions and answers

Summary of Contents for Earlex HV4500

  • Page 1 Spraystation® HV4500 Operating Manual...
  • Page 2 HV4500 Spraystation® HV5500 Operating Manual...
  • Page 3 HV4500 20-30 cm...
  • Page 4 HV4500...
  • Page 5: Table Of Contents

    HV4500 MANY THANKS FOR PLACING YOUR TRUST IN US We would like to congratulate you on purchasing this Earlex product; we are sure that you will enjoy working with it greatly. Please read the Operating Manual carefully and observe the safety information before starting the tool.
  • Page 6: Explanation Of Symbols Used

    HV4500 1. Explanation of symbols used This symbol indicates a potential danger to you or for the tool. Under this symbol you can find important information on how to avoid injuries and damage to the power tool. Danger of electrical shock Indicates tips for use and other particularly useful information.
  • Page 7 HV4500 d) Do not misuse the supply cord by carrying the tool by the cord, hanging it from the cord or by pulling on the cord to remove the plug. Keep the supply cord away from heat, oil, sharp edges or moving tool parts. Damaged or twisted leads increase the risk of an electric shock.
  • Page 8: Safety Instructions For Spray Guns

    HV4500 4. Power tool use and care a) Do not overload the tool. Use the power tool designed for the work that you are doing. You work better and safer in the specified performance range if you use the suitable power tool.
  • Page 9: Description/ Scope Of Delivery

    HV4500 Socket-outlets and plugs must be masked. Risk of an electric shock as a consequence of sprayed material entering the socket-outlet! • DO NOT use the spray guns to spray flammable substances. • The spray guns are not to be cleaned with flammable solvents.
  • Page 10: Field Of Application

    HV4500 5. Field of application Many different coating substances can be processed with this tool. 6. Coating Materials Suitable for Use Interior wall paint (dispersions and latex paint) Water and solvent-based paints, finishes, primers, clear finishes, staining sealers and wood sealer preservatives.
  • Page 11: Preparation Of The Coating Material

    HV4500 9. Preparation of the Coating Material • Mix the material well in the original container. When using interior wall paint, an agitator is recommended. The viscosity (thickness) of your paint may need thinning before spraying. Start with a 10% dilution. Stir well. If further thinning is required dilute by 5% and continue stirring until the finish of chosen coating is satisfactory.
  • Page 12: Selecting The Spray Setting

    HV4500 Spend some time practising on cardboard or a similar surface in order to determine the right flow rate of paint and air for the best spray pattern. Detailed information about these settings can be found in chapter 11- 12. 11. Selecting the Spray Setting WARNING! DANGER OF INJURY! Never pull the trigger guard while adjusting the air cap.
  • Page 13: Interruption Of Work

    HV4500 Fig. 7 A / 7 B: CORRECT Even distance to the object. Fig. 7 C: INCORRECT An uneven distance will result in uneven paint application. • Move the spray gun evenly side to side or up-and-down, depending on the spray pattern setting.
  • Page 14: Cleaning The Fluid Tip And Needle

    HV4500 16. Cleaning the Fluid Tip and Needle Removing the needle 1) Carefully unscrew and remove Material Volume Adjuster (Fig. 10, 1) at the back of the gun. 2) Remove Spring (Fig. 10, 2). 3) Pull back on Trigger (Fig. 11, 4) to release Fluid Needle (Fig. 10, 3) at the back of the gun.
  • Page 15: Spare Parts

    EAR2353989 Filter Fig. 12 A EAR2353961 Air Hose Fig. 1, 4 EAR2353907 19. Accessories Further information about the EARLEX range of products for renovating, is available on www.earlex.com. Accessories Designation Order No. Paint Container EAR2353992 20. Environmental protection The tool and all accessories and packaging have to be recycled in an environmentally friendly manner.
  • Page 16: Important Note Regarding Product Liability

    HV4500 21. Important Note regarding Product Liability! The manufacturer is liable for this product only if all parts originate from or were approved by the manufacturer and the tools are assembled and operated correctly. The use of other accessories and spare parts can partially or completely invalidate the liability.
  • Page 17: Technical Data

    Highly absorbent surface or paint ➞ Cross spray (Fig. 8) with poor covering capacity • Distance too large ➞ Closer to the object * Models - HV4500 and HV5500. 23. Technical Data Technical Data Power source 120 V ~ 60 Hz Power consumption...
  • Page 18 HV4500 WARNING This unit is a double-insulated appliance for your protection, no earthing wire is necessary. If the supply cord is damaged, it must be replaced by the manufacturer or its appointed agents to avoid a safety hazard. If you are using an extension lead it must be rated a minimum of 10 Amps and fully unwound.
  • Page 19: Warranty

    HV4500 2 year warranty The warranty runs for two years, counting from the date of sale (sales slip). It covers and is restricted to free-of-charge rectification of faults which are demonstrably attributable to the use of faulty materials in manufacture, or assembly errors; or free- of-charge replacement of the defective parts.
  • Page 20 HV4500...
  • Page 21 HV4500...
  • Page 22 HV4500 Wagner SprayTech Corporation 1770 Fernbrook Lane Plymouth, MN 55447 888-783-2612  www.earlex.com Not responsible for errors and changes. Part. No. L2314 01/15 Sous réserves d’erreurs et de modifications. Errores y modificaciones reservados © Copyright Wagner Spraytech (UK) Ltd.

Table of Contents