AT&T TL72408 User Manual page 65

Appendix
Troubleshooting
Incomplete
messages.
Difficulty hearing
messages.
System does
not answer after
correct number
of rings.
System
announces "Time
and day not set."
• If a caller leaves a very long message, part of it may
be lost when the system disconnects the call after four
minutes.
• If the caller pauses for more than seven seconds, the
system stops recording and disconnects the call.
• If the system's memory becomes full during a message,
the system stops recording and disconnects the call.
• If the caller's voice is very soft, the system may stop
recording and disconnects the call.
• Press VOLUME
• Make sure that the answering system is on (see page
39).
• If toll saver is activated, the number of rings changes to
two when you have new messages stored (see page 43).
• If the memory is full or the system is off, the system will
answer after 10 rings.
• You need to reset the answering system clock (page 38).
to increase speaker volume.
62