AT&T TL72408 User Manual page 13

Getting started
Installation options
Wall mount to desktop installation
To change the telephone base from the wall mount position to desktop
position.
1. Make sure that you unplug the power adapter and telephone line cord
from the wall outlets before you begin.
2. Untie the bundled telephone cord and power adapter cord, and remove them
from the telephone base.
3. Push the bottom of the bracket down towards the back of the telephone
base.
With the bottom of the bracket pushed down against the telephone base,
the DESK labels will match.
Push down on the bracket until it clicks into place.
Side view
Wall mode
DESK
DESK
10
Desk mode
DESK
DESK