SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The graphic symbols at the bottom of the set mean the following: DANGEROUS VOLTAGE: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage”...
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions 5. Do not use this product near water and moisture, for example: near a bathtub, washbowl, kitchen sink or laundry tub; in a wet basement; or near a swimming pool. 6.
24. Mains plug is used as disconnect device and it should remain readily accessible during intented use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the main socket outlet completely. 25. Minimum distance 10 cm around the apparatus for sufficient ventilation. 26.
Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be removed from the product before being charged. Rechargeable batteries are only to be charged under adult supervision. Different types of batteries or new and used batteries are not to be mixed. Only batteries of the same or equivalent type as recommended are to be used.
LOCATION OF CONTROLS Refer to the image p.2 1. STOP button 2. STANDBY button 3. MODE button 4. SKIP – (BACKWARDS) button 5. SKIP + (FORWARDS) button 6. PLAY/PAUSE button 7. CD door 8. CD DOOR OPEN button 9. STANDBY Indicator 10.
Page 8
CD OPERATION Play a CD 1. Press the CD DOOR OPEN button and carefully place a disc on the centre spindle with the printed label side facing up and close the CD DOOR OPEN button. 2. Press the STANDBY button to turn on the unit. STANDBY indicator is lit up in full brightness.
CD PROGRAMMED PLAY Use the program function to preselect the order in which a sequence of tracks will be played. Up to 20 tracks can be programmed. 1. Slide the FUNCTION selector to the CD position. 2. Press MODE, program indicator will light and “01” will blink on the LED display. 3.
Need help?
Do you have a question about the RCD102series and is the answer not in the manual?
Questions and answers