Table of Contents
Advertisement
Appendix
Adding and registering handsets
PLEASE WAIT...
HANDSET X
REGISTERED
2. On the telephone base, press and hold
HANDSET LOCATOR for about four seconds
(until the red IN USE light on the telephone base
turns on) and then release the button. The handset
will show PLEASE WAIT... and it will take about 10
seconds to complete the registration. The handset
will show HS X REGISTERED and will beep if the
registration is successful.
NOTES:
1. If the registration is not successful, the display will show NOT
REGISTERED. To reset the handset, remove the handset from the
telephone base and place it back in. Try the registration process
again.
2. You cannot register a handset if any telephone connected to the
same telephone line is in use.
43
Advertisement
Table of Contents
