Getting started
Installation options
Wall mount to desktop installation
To change the telephone base from the wall mount position to desktop
position.
1. Make sure that you unplug the power adapter and telephone line cord
from the wall outlets before you begin.
2. Untie the bundled telephone line cord and power adapter cord, and remove
them from the telephone base.
3. Push the bottom of the
bracket down towards the
back of the telephone base.
With the bottom of the
bracket pushed down against
the telephone base, the
DESK labels will match.
Push down on the bracket
until it clicks into place.
Side view
Wall mode
DESK
DESK
12
Desk mode
DESK
DESK