Bsd (Blind Spot Detection); Lca (Lane Change Assist); Warning Type - Kia 2016 Optima Owner's Manual

Hide thumbs Also See for 2016 Optima:
Table of Contents

Advertisement

Driving your vehicle

BSD (Blind Spot Detection) /

LCA (Lane Change Assist)

Operating conditions
The indicator on the switch will illumi-
nate when the Blind Spot Detection
System (BSD) switch is pressed with
the Engine Start/Stop Button ON.
If vehicle speed exceeds 18.6 mph
(30 km/h), the system will activate.
If you press the switch again, the
switch indicator and system will be
turned off.
If the vehicle is turned off, the system
will remember the last settings upon
restart.
6
86
When the system is not used turn the
system off by turning off the switch.
When the system is turned on the
warning light will illuminate for 3 sec-
onds on the outside rearview mirror.
OJF055098

Warning type

The system will activate when:
1. The system is on.
2. Vehicle speed is above 18.6 mph
(30 km/h).
3. Other vehicles are detected in the
rear side.
WARNING
The
Blind
Spot
Detection
System
with
Lane
Assist and Rear Cross Traffic
Alert is not a substitute for
proper and safe lane changing
procedures. Always drive safely
and use caution when changing
lanes. The Blind Spot Detection
System may not detect every
object alongside the vehicle.
Change

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents