Programming Homelink; Standard Programming - Kia 2016 Optima Owner's Manual

Features of your vehicle
Retain the original transmitter of the
RF device you are programming for
use in other vehicles as well as for
future HomeLink ® programming. It is
also suggested that upon the sale of
the vehicle, the
HomeLink ® buttons be erased for
security purposes.
4 56

Programming HomeLink

✽ ✽ NOTICE
• When programming a garage
door opener, it is advised to park
the vehicle outside of the garage.
programmed
• It is recommended that a new bat-
tery be placed in the hand-held
transmitter of the device being pro-
grammed to HomeLink
er training and accurate transaxle of
the radio-frequency signal.
• Some vehicles may require the igni-
tion switch to be turned to the sec-
ond (or "accessories") position for
programming and/or operation of
HomeLink
• In the event that there are still pro-
gramming difficulties or questions
after following the programming
steps
HomeLink
or 1-800-355-3515.
®
®
for quick-
® .
listed below, contact
® at: www.homelink.com

Standard programming

To train most devices, follow these
instructions:
1. For first-time programming, press
and hold the two outside buttons,
HomeLink ® Channel
Channel 3 Buttons, until the indi-
cator light begins to flash (after 20
seconds). Release both buttons.
Do not hold the buttons for longer
than 30 seconds.
2. Position the end of your hand-held
transmitter 1-3 inches (2-8 cm)
away from the HomeLink
while keeping the indicator light in
view.
3. Simultaneously press and hold
®
both the HomeLink
held transmitter button. DO NOT
release the buttons until step 4
has been completed.
4. While continuing to hold the but-
tons the red Indicator Status LED
will flash slowly and then rapidly
after HomeLink ® successfully
trains to the frequency signal from
the hand-held transmitter. Release
both buttons.
1 and
® buttons
and hand-