Ford 2006 Mountaineer Owner's Manual page 86

Driver Controls
• Running Boards (if equipped)
• Easy Entry/Exit Seat
• Park Aid
• Compass Zone
• Compass Calibration
• Oil Life Start Value
AWD lock (vehicles equipped with AdvanceTrac with RSC only)
Select this function from the SETUP MENU to display the AWD locked
function.
1. To disable/enable the AWD
feature, select this function from the
SETUP MENU.
2. Press the RESET control to select
the AUTO or LOCKED mode.
3. Press the RESET control for the
next SETUP MENU item or wait for
more than 4 seconds to return to
the INFO menu.
Note: When the AWD system is in the LOCKED mode, the 4X4 indicator
will be illuminated.
System check
Selecting this function from the
SETUP MENU causes the message
center to cycle through each of the
systems being monitored. For each
of the monitored systems, the
message center will indicate either
an OK message or a warning
message for two seconds.
Pressing the RESET control cycles the message center through each of
the systems being monitored.
The sequence of the system check report and how it appears in the
message center is as follows:
1. OIL LIFE RESET
2. CHARGING SYSTEM
3. WASHER FLUID
86
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)