Lubricant Specifications - Ford 2006 Mountaineer Owner's Manual

Maintenance and Specifications
an automatic transmission application requiring MERCON SP may cause
transmission damage. Use of a transmission fluid other than the
recommended fluid may cause transmission damage. Refer to your
scheduled maintenance information to determine the correct service
interval.
2
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be checked by a qualified
technician.
3
Add the coolant type originally equipped in your vehicle.
5
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only have the API Certification mark and meet the requirements
of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (4.6L).

LUBRICANT SPECIFICATIONS

Ford Part Name
Item
or equivalent
Motorcraft High
Performance
Brake fluid DOT 3 Motor
Vehicle Brake
Fluid
Body hinges,
latches, door
striker plates and
rotors, seat
Multi-Purpose
tracks, fuel filler
Grease
door hinge and
spring, hood
latch, auxiliary
latch, seat tracks
Door Silicone Spray
weatherstrips Lubricant
Motorcraft
Lock cylinders Penetrating and
Lock Lubricant
Driveshaft, slip
Premium Long
spline, universal
Life Grease
joints
314
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)
Ford Part Ford
Number Specification
PM-1 ESA-M6C25-A
XG–4 or XL-5 ESB-M1C93–B
XL-6 ESR-M13P4-A
XL-1 none
XG-1-C ESA-M1C75-B