Traction Control/Advancetrac - Ford 2006 Mountaineer Owner's Manual

Hide thumbs Also See for 2006 Mountaineer:
Table of Contents

Advertisement

Available languages

Available languages

Driving
ADVANCETRAC WITH ROLL STABILITY CONTROL
STABILITY ENHANCEMENT SYSTEM
The AdvanceTrac with RSC system provides stability enhancement
features such as Roll Stability Control
Control (ESC) and Traction Control (TCS) for certain driving situations.
The system includes an AdvanceTrac with RSC on/off button, and a
"sliding car" icon in the instrument cluster.
Some drivers may notice a slight movement of the brake pedal when the
AdvanceTrac with RSC performs a system self-check. During
AdvanceTrac with RSC operation you may experience the following:
• A rumble, grunting, or grinding noise after startup and when driving
off
• A slight deceleration of the vehicle
• The AdvanceTrac with RSC indicator light will flash when the system
is activated.
• If your foot is on the brake pedal, you will feel a vibration in the pedal.
• If the driving condition is severe and your foot is not on the brake, the
brake pedal will move to apply higher brake forces. You may also hear
a whoosh of air from under the instrument panel during this severe
condition.
Traction Control
Traction Control helps your vehicle maintain traction, when driving on
slippery and/or hilly road surfaces, by detecting and controlling wheel
spin. Excessive wheel spin is controlled by momentarily reducing engine
power and/or applying the anti-lock brakes. Traction Control is a driver
aid that helps your vehicle.
If your vehicle should become stuck in deep snow or mud, try switching
the AdvanceTrac with RSC system off by pressing the AdvanceTrac
with RSC button momentarily. This will allow your tires to "dig" for
traction.
If the AdvanceTrac with RSC system is activated excessively in a short
period of time, the brake portion of the system will disable to allow the
brakes to cool down. In this situation, Traction Control will use only
engine power reduction to help control the wheels from over-spinning.
When the brakes have cooled down, the system will again function
normally. Anti-lock braking, RSC and ESC are not affected by this
condition and will function normally during the cool-down period.
214
2006 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)
(RSC)
(RSC), Electronic Stability

Advertisement

Chapters

Table of Contents
loading

Table of Contents