Managing The Contact List - Motorola 6840420Z01-AD Start Here Manual

Call Waiting
When you are on a call, an audible beep signals a 2nd call.
Action
Press and release the ANSWER button to place the 1st
call on hold and answer the incoming call.
Each time you press and release the ANSWER button,
you toggle between active calls.
Note: If the ANSWER button is not pressed, the incoming
call is automatically rejected and sent to voicemail (if set
up on the phone).
Sending DTMF Tones
You can send DTMF tones from the phone keypad, or by
using the Enter command:
Action
1 Press the TALK button.
2 When prompted, say "Enter <digits>" to send
numbers as DTMF tones.

Managing the Contact List

You can store a list of names and phone numbers in your
car kit's contact list. The list can include up to 20 entries.
Adding an Entry
Action
1 Press the TALK button.
2 When prompted, say "Contact List."
3 If the system responds: Contact list is empty. Do you wish to
add a contact?, say "Yes."
or
If the system responds: Contact list. Please say a command,
say "Add Contact."
4 When the system responds: Please say the name, recite
the contact to be stored.
If an error is detected, the system asks you to try
again.
If it accepts the name, the system responds: Please say
the number for <contact>.
5 Dictate the phone number as an entire number
(without pauses between digits).
or
Dictate the number as a series of segments (for
example, say the 1st 3 digits, then the next 3, etc.),
until you have dictated the entire number.
The system repeats the number it heard.
35 36