Basic Operations; Turn On/Off The Camera; Tally Lamp - Panasonic AG-HMC80P Operating Instructions Manual

Basic Operations

Turn on/off the camera

While pressing the lock release button, move the
POWER switch to ON or OFF.
Turn on the camera:
Turn off the camera:
The mode lamp (CAMERA) goes out.
• Energy-saving mode
ON:
OFF: Does not switch OFF the camera.
*
See the setup menus, POWER SAVE
(Page 111 of Vol.2) for details.

Tally lamp

You can set the tally lamp to light in the following
situations by setting the REC LAMP item
(Page 110 of Vol.2) in the OTHER FUNCTIONS
screen to OFF.
The tally lamp light can be switched to FRONT,
REAR or BOTH with the setting menu. For more
details, refer to the setting menu REC LAMP item
(Page 110 of Vol.2).
• Battery is low (flashes 4 times per second)
• Available SD Memory Card capacity is low
(flashes 4 times per second)
• Remaining battery capacity is low
(flashes once per second)
• Remaining memory of the SD Memory Card is
low (flashes once per second)
In addition, the location set for the REC LAMP
item will flash when receiving commands from the
remote control.
30
POWER switch
Set the POWER switch to the
ON position while pressing the
lock release button.
The CAMERA lamp lights
(red), and the camera enters
recording standby mode.
Lock release button
Tally lamp (REAR)
Tally lamp (FRONT)
Mode lamp