Adjusting the grip belt
Adjust the grip belt to suit your hand, and hold it
correctly.
1
Open the belt cover and loosen the belt.
2
Work your hand through the grip belt and
fasten the belt.
•
Slip your hand through the belt as far as
it goes.
•
Tighten up the belt so that your hand
remains firmly in place.
Attaching the shoulder strap
Attach the shoulder strap and use it as a precaution against dropping the camera.
1
Thread the belt through the shoulder belt
installation hole.
•
Thread the belt through the fastener
after threading through the shoulder belt
installation hole. At least 2 cm of the belt
must extend from the fastener.
•
When loosening the belt, please take care so
that the belt does not come away from the grip
belt stopper.
Grip belt stopper
2
Install the belt on the other shoulder belt
installation hole.
27