Adjusting The Sound Characteristics; Quickly Attenuating The Sound - Sony WX-C5000 Operating Instructions Manual

Other operations
Rotate the VOL control
to adjust the volume.
Press (DSPL) to change
the display items.
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
To increase
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for two seconds while
pushing the VOL control.
Press (ATT) to
attenuate the
sound.
Press (OFF) to
stop playback or
radio reception.
Press (SOUND)
to adjust the
volume and
sound
characteristics.
To decrease
Adjusting the sound
characteristics
1
Select the item you want to adjust by
pressing (SOUND) repeatedly.
Each time you press (SOUND), the item
changes as follows:
B VOL B BAS
(volume)
FAD b
(front-rear)
2
Adjust the selected item by rotating the
jog roller.
Adjust within three seconds after selecting.
(After three seconds the jog roller will again
serve as the volume control.)
Quickly attenuating the
sound
(With the rotary commander)
Press (ATT) on the rotary commander.
"ATT" flashes on the display while the
function is on.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
B TRE
(bass) (treble)
BAL b
(left-right)
15