Before you can use your headset, you must pair
(link) it with your phone.
Step A - ENSURE HEADSET IS IN PAIRING
Power on headset by sliding the Power switch
towards the microphone to initiate easy
pairing. After a few moments, the indicator
light will be steadily lit in blue to indicate
headset is in pairing mode.
If the headset does not enter pairing mode,
see TROUBLESHOOTING for help.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
1-888-390-6456 (TTY/TDD United States for
Guide Number: 68000192001-A
Bluetooth QD ID: B014439
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and their
accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
© 2008 Motorola, Inc. All rights reserved.
Step B - SET YOUR PHONE TO LOOK FOR
For most Motorola phones:
On your Motorola phone, press
Settings > Connection > Bluetooth Link > Handsfree
> Look for Devices.
The phone lists Bluetooth devices it finds.
Select Motorola H390.
Select OK or Yes to pair your headset with
Enter the passkey: 0000
When your headset successfully pairs and
connects with your phone, the indicator light
changes from steadily lit to flashing blue and
Note: These steps are for most Motorola phones.
For other phones, see your phone's user's guide.