Technical Characteristics - Ecleree PAM2600 Service Manual

TECHNICAL CHARACTERISTICS

Frequency response at max.
power output.
Harmonic distortion+noise
from 20Hz to 20kHz meas.band
Intermodulation distortion
(SMPTE) using frequencies of
50Hz and 7kHz at 4:1 ratio,
nominal power.
TIM 100
Signal noise ratio
from 20Hz to 20kHz Ref.1W/4 Ω
To 4Ω nominal power.
Damping factor at 1kHz 8 Ω
Slewrate
Channel crosstalk at 1kHz
Inputs balanced and provided
with XLR3.
CLIP indicators at -0,3dB
Outputs
Protections
Power requirements 110V,120V
220V,230V,240V AC 50/60Hz
Dimensions Front pannel
Chassis
Weight
PAM2600
7Hz to 60kHz +0 -1dB
<0,02%
<0,03%
<0,05%
>80 dB
>111 dB
>140
" 98 V/µs
>65 dB
Sensitivity/load
These are provided with 2 speak on.
-Delayed turn-on heavy duty relay with PROTECT indicator ON
during standby.
-DC:4Hz or DC at 2V,PROTECT INDICATOR.
-Thermal:A sensor activates a high temperature detection
circuit,channel shut down at 90 º ,THERMAL indicator.
-Overload:Protection against output short circuit.PROTECT
indicator.
-Autoreset:Four automatic reset during
of short circuit.After this period reset mustbe done manually.
-Soft start system.
-Varispeed Fan controled according to internal temperature.
3650 VA
482,6x132,5mm
440x132,5x514mm
31.2 kg
PAM2000
<0,02%
<0,03%
<0,03%
>80 dB
>110 dB
>140
" 92 V/µs
>65 dB
0dBV/1V/47k Ω
five minutes in case
2730 VA
30.5 kg