Driving
Switching on / Pause
F Turn thumb thumb wheel 1 to the "LIMIT"
position: the speed limiter mode is selected
but is not switched on (Pause).
F Switch the speed limiter back on by
pressing button 4, if the speed displayed
is suitable (by default, the last speed
programmed).
F You can temporarily stop the the speed
limiter by pressing button 4 again: the
display confirms that it has been stopped
(Pause).
158
Adjusting the speed limiter
setting
You do not have to switch the speed limiter on
in order to set the speed.
Once the function is selected, you can modify
the speed setting by:
-
pressing button 5:
F the six speeds memorised are displayed
in the touch screen tablet,
F press the button corresponding to the
speed limit chosen
The value is displayed in the instrument
panel.
The selection screen closes after a few
moments.
-
using buttons 2 and 3, increasing or
decreasing the speed displayed:
F by successive short presses, to modify
by + or - ½ mph (1 km/h),
F by a maintained press, to modify in steps
of + or - 3 mph (5 km/h).