CITROEN C4 PICASSO Handbook page 265

F Press the tongue, slide the tool box cover
to the centre and remove it for access to
the other tools (jack and wheel bolt head
finisher removal tool for alloy wheels).
Stowing the tools
F Return the tools to the box and stow the
box in the vehicle's boot.
F Wind in the carrier by turning the
wheelbrace clockwise: once the cable is
fully wound in you should no longer feel
any resistance.
F Stow the other tools in the locations
provided in the boot.
A puncture wheel from the vehicle
cannot be fitted under the vehicle. It
must be carried in the boot. Use a cover
to protect the boot.
Practical information
Putting the carrier and spare
wheel back in place
F Stow the corresponding tools in the box
and close the cover.
F Position the tool box on the ground.
When the spare wheel is fitted in place
of a punctured wheel, it is essential
to return the carrier and tools to their
normal position under the vehicle
before moving off.
7
263