Leveling; Leveling The Unit; Leveling Legs - Electrolux ICON Use & Care Manual

Hide thumbs Also See for ICON:

Table of Contents

Leveling

Position the unit on a flat, level surface capable of supporting the entire weight of the unit

when full.

Adjustable legs at the front and rear corners of the appliance should be set so the unit

is firmly positioned on the floor and level from side to side and front to back. The overall

height of your Electrolux appliance may be adjusted between the minimum, 33 ¾"

(85.7cm), by turning the leveling leg in and the maximum, 34 ¾" (88.3cm), by turning the

leveling leg out.

To adjust the leveling legs, place the appliance on a solid surface and protect the floor

beneath the legs to avoid scratching the floor. With the assistance of another person,

lean the appliance back to access the front leveling legs. Raise or lower the legs to the

required dimension by turning the legs. Repeat this process for the rear by tilting the

appliance forward using caution. On a level surface check the appliance for levelness

and adjust accordingly.

Leveling legs, 2

at the front and 2

in the rear.

Front Grille,

keep this area

open.

Table of Contents