Setup Procedure - Epson TM-C3400 Reference Manual

Setup Procedure

The setup procedure from the printer installation to ready-to-print status is described below.
1
Install the printer.
2
Connect the power supply unit.
3
Load the roll paper included in the package in the printer.
4
For Ethernet interface model, connect the printer to the network.
69)
5
Load the ink cartridge.
Turn on the printer before loading the ink cartridge.
It takes about 8 minutes for ink charging. When ink charging finishes, the POWER LED
stops flashing and stays on.
6
For the Ethernet interface model, make the network settings such as IP
address to the printer with EpsonNet Config.
7
For the USB interface model, connect the printer to the client computer.
(page 68)
Turn off the printer before connecting it to the client computer.
(page 64)
(page
(page 66)
Chapter 5 Maintenance of the TM-C3400
65)
(page 84)
(page
5
225