Epson TM-C3400 Reference Manual page 170

2
Click [Add].
The selected barcode font is saved and the font name is added to the font list.
• The barcode font can be registered up to 30.
• The barcode font setting can be overwritten by clicking [Save] after selecting the font
• The barcode font setting can be deleted by clicking [Delete] after selecting the font name
• Test print is executed according to the setting by clicking [Print] after inputting the text in
Specifying the barcode data
Specify the barcode data by referring to the following descriptions.
About the composite symbol:
The composite component type is selected automatically depending on the digit number of
the data. (CC-C is selected only when GS1-128 is set.)
Composite Component Type
CC-A
CC-B
CC-C
About the HRI character:
When the total width of the HRI character is larger than that of the barcode, the HRI character
width is set as the barcode width.
UPC-A
❏ Normal
• Specify the data of 11 to 12 digits.
• The first digit is an unchecked number system character.
• For data of 11 digits, a check digit is automatically added.
• For data of 12 digits, the 12th digit is regarded as a check digit, but not proved.
❏ Composite (difference from Normal)
• For data of 12 digits, the 12th digit is ignored, and a check digit is automatically added.
170
name from the font list and changing the setting.
from the font list.
the box.
Encodable Digit Number
1 ~ 56 digits
1 ~ 338 digits
1 ~ 2361 digits