Operating Instructions; To Turn Off Gas To Appliance - Dunkirk 90-50 Installation, Operation & Maintenance Manual

STOP! Read the safety information above on this label.
1.
Set thermostat to lowest setting.
2.
Turn off all electric power to the appliance.
3.
This appliance is equipped with an ignition device which
4.
automatically lights the burner. DO NOT try to light the burner
by hand.
Remove the front jacket panel.
5.
Turn the gas control knob clockwise
6.
INLET
GAS CONTROL KNOB
SHOWN IN "ON" POSITION
Set the thermostat to lowest setting.
1.
Turn off all electric power to the appliance if service is to be
2.
preformed.
Safe lighting and other performance criteria were met with the gas manifold and control assembly provided on the boiler when the boiler
underwent tests specified in ANSI Z21.13-latest revision.

operaTing insTruCTions

to "OFF".
ON
OFF

To Turn off gas To applianCe

Wait five (5) minutes to clear out any gas. Then smell for gas,
7.
including near the floor. If you smell gas, STOP! Follow "B"
in the safety information above on this label. If you don't smell
gas go on to next step.
Turn the gas control knob counterclockwise
8.
Replace front jacket panel.
9.
Turn on all electrical power to the appliance.
10.
Set the thermostat to desired setting.
11.
If the appliance will not operate, follow the instructions "To
12.
Turn Off Gas To Appliance" and call your service technician or
gas supplier.
Remove the front jacket panel.
3.
Turn gas control knob clockwise
4.
Replace the front jacket panel.
5.
35
to "ON".
to "OFF".