Do you have a question about the DXL-50 and is the answer not in the manual?
Questions and answers
John Ward
February 1, 2025
Why does my DLX-75 come on for approximately 10 minutes then goes out
1 comments:
Mr. Anderson
February 10, 2025
The Dunkirk DXL-50 may turn on for about 10 minutes and then shut off due to several possible reasons:
1. Economy Feature Enabled – The Economy Feature lowers the average boiler temperature, which can slow or prevent the house from reaching the desired temperature. Lowering this setting may help. 2. Thermostat Settings – Incorrect thermostat settings, including heat anticipator settings on non-digital thermostats, can cause short cycling. Checking and adjusting these settings may resolve the issue. 3. Air Bond in Radiators – Air trapped in the system can affect heating performance. Bleeding the radiators may help. 4. Ignition or Gas Supply Issues – If the ignition system or gas supply is faulty, the boiler may shut down prematurely. Checking for gas pressure and ensuring proper ignition function may be necessary.
Further troubleshooting may be needed to identify the exact cause.
Need help?
Do you have a question about the DXL-50 and is the answer not in the manual?
Questions and answers
Why does my DLX-75 come on for approximately 10 minutes then goes out
The Dunkirk DXL-50 may turn on for about 10 minutes and then shut off due to several possible reasons:
1. Economy Feature Enabled – The Economy Feature lowers the average boiler temperature, which can slow or prevent the house from reaching the desired temperature. Lowering this setting may help.
2. Thermostat Settings – Incorrect thermostat settings, including heat anticipator settings on non-digital thermostats, can cause short cycling. Checking and adjusting these settings may resolve the issue.
3. Air Bond in Radiators – Air trapped in the system can affect heating performance. Bleeding the radiators may help.
4. Ignition or Gas Supply Issues – If the ignition system or gas supply is faulty, the boiler may shut down prematurely. Checking for gas pressure and ensuring proper ignition function may be necessary.
Further troubleshooting may be needed to identify the exact cause.
This answer is automatically generated