Philips HR7723/00 Service Manual

Philips Domestic Appliances and Personal Care
Service Manual
PRODUCT INFORMATION
- The food processors are equipped with mechanical and
thermal safety switches.
- Product meets the requirements regarding interference
suppression on radio and TV.
- After the product has been repaired, it should function
properly and has to meet the safety requirements as
laid down offi cially established at this moment.
Automatic resettable cut-out (part of item 7)
- To prevent damage due to overheating, the appliance
has been equipped with an automatic cut-out system.
This system will automatically cut off the power supply
when the appliance overheats.
If the appliance suddenly stops running:
- Unplug the appliance
- Set the knob to position 0
- Let the appliance cool down for 15 minutes
- Plug the appliance in again
- Switch the appliance on again
Safety lock (item 1)
- Place the lid on the bowl in the right position.
The appliance will only function if the arrow on the
applinace is directly opposite the mark on the lid of
the food processor bowl and the same holds for the
other accessoires. The built-in safety lock will now be
deblocked and you can turn the appliance on.
Note that if both the blender jar and the bowl have been
correctly mounted, only the blender will function.
Important:
- If the appliance is used without the blender jar, the
appliance will not function if the screw cap has not been
screwed onto the attaching hole for the blender.
Published by Philips Domestic Appliances and Personal Care
4322 277 01090
02/11
Cucina
TECHNICAL INFORMATION
- Motor power
- Voltage
- Frequency
- Colour
- Cordset
- Speed settings
- Bowl capacity
- Blender capacity
- Speeds unloaded
- Weight in fancy box : HR7723/24 - 5100 g
- Dimensions
(l x w x h)
- SAP coding
Printed in the Netherlands © Copyright reserved

Food processor

HR7723/00
HR7724/16
: HR7723 - 600 W
HR7724 - 700 W
: 230 V
: 110 V
: 50 / 60 Hz
: White
: 125 cm
: 2 speeds + pulse
: 2.5 l dry ingredients
1.0 l liquids
: 1.0 l liquids
2.0 l (max. contents)
: blender drive shaft 17000 rpm (max)
acc. drive shaft 2150 rpm (max)
acc. drive shaft 1400 rpm (min)
: HR7723/24 - 420 x 280 x 360
: HR7723/00
HR7724/16
Subject to modification