1-3. Additional Symbols For Installation, Operation, And Maintenance
FIRE OR EXPLOSION hazard.
•Do not install or place unit on, over, or near combustible surfaces.
•Do not install unit near flammables.
•Do not overload building wiring - be sure power supply system is properly sized,
rated, and protected to handle this unit.
• Manufactures will not take responsibility on machine and related accident if
user change the design & function
☞ It must be kept original condition as supplier's design.
☞ Do not operate the machine without all the protective guards in the
closed position.
☞ Never attempting to repair, adjusting, clean, or lubricate and moving parts
while machine in motion.
DANGER
- 8 -
VER 2. 0