Section 1 - Safety Precautions - Read Before Using; Symbol Usage; Arc Welding Hazards - Hyundai Dynamic auto 350M Operation Manual

SECTION 1 - SAFETY PRECAUTIONS

1-1. Symbol Usage

The symbols shown below are used throughout this manual to call attention to and identify
possible hazards. When you see the symbol, watch out, and follow the related instructions to
avoid the hazard.
This safety alert symbol is used with the signal words DANGER and WARNING to
call attention to the safety statements.
DANGER statements identify procedures or practices which must be followed to avoid
serious personal injury or loss of life.
WARNING statements identify procedures or practices which must be followed to avoid
minor personal injury or damage to this equipment.

1-2. Arc Welding Hazards

Means Danger! Warning! Watch Out! There are possible hazards with this procedures!
The possible hazards are shown in the adjoining symbols.
This group of symbols means Danger! Warning! Watch Out! possible ELECTRIC
SHOCK and HOT PARTS hazards. Consult symbols and related instructions below for
necessary actions to avoid the hazards.
- READ BEFORE USING
statements identify special instructions necessary for the most efficient
operation of this equipment.
- 2 -
VER 2. 0