Hyundai Dynamic auto 350M Operation Manual page 5

HOT PARTS can cause severe burns.
•Do not touch hot parts bare handed.
•Allow cooling period before working on gun or torch.
MAGNETIC FIELDS can affect pacemakers.
•Pacemaker wearers keep away.
•Wearers should consult their doctor before going near arc welding, gouging, or spot
welding operations.
About Pacemakers
Pacemaker wearers consult your doctor first. If cleared by your doctor, then following
the above procedures is recommended.
•Electromagnetic energy can interfere with sensitive electronic equipment such as
computers and computer-driven equipment such as robots.
•Be sure all equipment in the welding area is electromagnetically compatible
•To reduce possible interference, keep weld cables as short as possible, close
together, and down low, such as on the floor.
•Be sure this welding machine is installed and grounded according to this manual.
•If interference still occurs, the user must take extra measures such as moving the
welding machine, using shielded cables, using line filters, or shielding the work area.
DANGER
DANGER
DANGER
- 4 -
VER 2. 0