Rinnai HDC 1600i Low NOX Installation And User Manual page 13

TEMPERATURE CONTROLS
Do not push the ON/OFF button on the
Master controller after transferring priority
of temperature selection to a Secondary
controller as the system will shut down.
Do Not Turn OFF the Master Controller
If a temperature over 50°C
has been selected
controller and priority
temperature selection
transferred to
controller, then back again,
the temperature
controller will automatically
drop to 50ºC. If the set point is
50°C or less it will not alter.
This is a safety feature.
Depending on the weather conditions
and the length of the pipe between the
heater and the tap in use, there may be a
variation between
displayed at the controller and the
temperature at the tap.
on a
Kitchen
of
is
another
on the
the temperature
Temperature priority cannot be switched
to another controller when the water is
flowing through the water heater.
Controller 1
in use
Bathroom
Do not clean the control with solvents or
detergents.
Use only a soft damp cloth.
13
X
Controller 2
cannot take
priority
Kitchen