Paper Handling; Loading Cut Sheet Paper - Oki ML1120 User Manual

P
APER HANDLING
This section describes how to use cut sheet paper and continuous
forms in your printer.
L
OADING CUT SHEET PAPER
1. Ensure that the printer is switched ON.
NOTE
If there are any continuous forms in the printer, eject them
as described in
2. Ensure that the Pin Tractor covers are closed to avoid the
possibility of paper jams.
3. Ensure the Paper Type Lever (1) is set to Cut Sheet.
ML1120/ML1190 eco User's Guide – Paper handling > 18
"Removing continuous forms" on page 37.
1