Location And Functions Of Parts And Controls; Camera - Sony SRG-120DH Operating Instructions Manual

Location and
Functions of Parts
and Controls

Camera

Front
A Lens
This is a 12-magnification optical zoom
lens.
B Infrared remote commander
sensors
These are sensors for the supplied
infrared remote commander.
C POWER lamp
The green lamp lights when the camera
is connected to an AC outlet using the
supplied AC power adaptor and AC
power cord. It takes about 15 to
30 seconds to display the image after the
lamp lights.
The green lamp flashes when the camera
receives an operation command from the
supplied infrared remote commander.
8

Location and Functions of Parts and Controls

D STANDBY lamp
The orange lamp lights when the camera
is turned off using the infrared remote
commander.
Rear
E SYSTEM SELECT switch
Used for selecting the video format of
the signal to be output from the HDMI
video connector.
For details, see "Setting of the SYSTEM
SELECT switch" (page 9).
F HDMI video connector
Supplies the images as a HDMI video
signal or DVI video signal.
G IR SELECT switch
Select the camera number when you
operate multiple cameras with the same
infrared remote commander.
H VISCA IN connector
Connect to a computer via an RS-232
interface. When you connect multiple
cameras, connect it to the VISCA OUT
connector of the previous camera in the
daisy chain connection.
I VISCA OUT connector
When you connect multiple cameras,
connect it to the VISCA IN connector of
the next camera in the daisy chain
connection.