c.
Connect the fan plug to the system board (3).
24.
Align the HDD guide screws with the slots on the HDD drive cage, press the HDD down into the cage, then
slide it forward until it stops and locks in place (1).
25.
Connect the HDD power and data cable (2) to the HDD.
26.
Replace the access panel.
27.
If the computer was on a stand, replace the stand.
28.
Plug in the AC power cord and turn on the computer.
29.
Lock any security devices that were disengaged when the computer cover or access panel was removed.
34
Chapter 2 Hardware upgrades