14.
Locate the SSD on the system board.
15.
Remove the screw securing the SSD to the system board.
16.
Grasp the SSD by the sides and carefully pull it out of the socket.
17.
Insert the new SSD into the socket on the system board.
NOTE:
18.
Press the SSD connectors firmly into the socket.
19.
Press the SSD down to the system board and use the included screw to secure the SSD.
20.
Set the HDD cage into the chassis (1).
21.
Press the hood sensor firmly into place (2).
22
Chapter 2 Hardware upgrades
An SSD can be installed in only one way.