Table of Contents
Advertisement
WIFI OPERATION
(IOS system APP)
Download and install iphone WIFI APP onto the mobile smart phone
Install a "Wifi Smart Cam" APP from the APP Store on a mobile smart phone.
Start by searching for "Wifi smart cam." Find the WIFI Cam APP with the APP Icon
as shown on right with Smart Cam on app window.
After installing the APP in "Settings" on the phone change the network on the
mobile smart phone to "Neo" to connect to the Neo Venture Camera Wifi. The
default password is: 1234567890. You will only see the "Neo" network when the
Look for this Wifi Cam App
Neo Venture camera is turned on.
Icon
in the iphone App Store
Open the Smart Cam APP on the smart mobile phone.
Tap on the
icon in upper right corner of the mobile smart phone APP for
settings and configuration. Tap on "Camera Settings" to set preferred parameters.
Options include:
Video resolutions: 1080p 30/720p 60/720p VGA
Image resolutions: 14M/12M/8M/5M/3M/2M/VGA
Motion detection: ON/ OFF
Flicker: 50Hz/60Hz
White balance: Auto/Daylight/Cloudy
Exposure: -2.0~+2.0 (range)
Sync Time/Date
13
Advertisement
Table of Contents
