TABLE OF CONTENTS Introduction ……………………………………………………………………………………………. Camera Specifications ……………………………………………………………………………….. Camera Components ………………………………………………………………………………… Camera Buttons/Features……………………………………………………………………………. Digital Remote Controller ……………………………………………………………………………. Main Camera Icons ……………………………………………………………........ Camera Button Definition ……………………………………………………………………………. Remote Controller Button Definition ………………………………………………………………... Basic Operation ………………………………………………………………………………………. Menu Settings ………………………………………………………………………………………… Battery …………………………………………………………………………………………………. Uploading Files ……………………………………………………………………………………….. Wifi Operation ………………………………………………………………………………………….
INTRODUCTION Please use your Neo Action camera in a responsible and safe manner. Your Neo Camera warranty does not cover damages resulting from accidents or user error. Camera Care Your Neo action camera is not crash resistance, please avoid impacting hard objects with the camera.
Page 4
Waterproof Case Care Keep the rubber seal on the waterproof case clean and free of any foreign objects. Hair and sand can cause leakage. Best care is to clean the waterproof case with a non-dust cloth. After every use in salt water, you will need to rinse the outside of the waterproof case housing with non-salt water and thoroughly dry.
CAMERA COMPONENTS 1/4 Tripod Mount Neo Venture Waterproof Case USB Cable Digital Remote Camera Controller Flat Adhesive Curve Adhesive Manual *Head Belt Mount Battery Mount mount *Suction Cup *Chest Harness *Roll Bar Mount *Surfboard Mount *Helmet Mount Mount mount Noted: *Marked are optional accessories...
CAMERA BUTTONS/FEATURES Video Button Photo Button/Power On Microphone SD Card Slot Wifi On/On Button Camera Lens Touch Screen LCD HDMI Plug USB Plug...
DIGITAL REMOTE CONTROLLER 1. Digital Screen 2. USB Plug 3. Photo Button 4. Power/Wifi On/Off 5. Video Button MAIN CAMERA SCREEN ICONS Video Button Return Button Menu / Delete Power On/Photo Button Battery Capacity SD Car Slot Playback Mode Video Wifi Button...
CAMERA BUTTON DEFINITION Power On-Off / Photo button Press and hold (3 seconds) to power on or off camera. Once camera is on, press to take photos. Video Button Press to start video recording, press again to stop recording. M (menu) Button Press M button to enter menu function setting Return Button Press to return last page.
BASIC OPERATION Insert micro SD card (class 4 or higher). Insert battery into the camera (open door located on the bottom of the camera). Ensure that the battery contacts are lined up correctly. The battery may need to be charged prior to use (see BATTERY page 13). Press and hold the PHOTO/POWER button for 3 seconds to turn on the camera After your camera is on, press the PHOTO button to take photos.
MENU SETTINGS Movie Mode Movie mode -- touch M button to enter the selections (full HD 30fps/HD 30fps/HD 60 fps/VGA30 fps) Loop recording -- touch M button to enter the selections (off/1min/3mins/5mins/10mins) Sound record -- touch M button to enter the selections (on/off ) MIC sensitivity —...
Page 12
Media Tool Format SD-card— touch M button to enter the selections (yes/no) SD-card info — touch M button to enter the selections and check storage remaining General Settings Beep — touch M button to enter the selections (on/off) Power off — touch M button to enter the selections (never/1min/5min) Clock settings —...
BATTERY Battery operating time is about 1 hour. To recharge the battery connect the camera to a power source using a USB wall plug (not included) or car charger (optional) or connect to a PC using the included USB cable Battery charges up to 80% in 1-2 hours, and is fully charge (100%) in approximately 4 hours.
After installing the APP in “Settings” on the phone change the network on the mobile smart phone to “Neo” to connect to the Neo Venture Camera Wifi. The default password is: 1234567890. You will only see the “Neo” network when the Look for this Wifi Cam App Neo Venture camera is turned on.
Page 15
After installing the APP in “Settings” on the phone change the network on the mobile smart phone to “Neo” to connect to the Neo Venture Camera Wifi. The default password is: 1234567890. You will only see the “Neo” network when the Look for this Wifi Cam Neo Venture camera is turned on.
WIFI CAMERA CONTROL Smart Cam App for Mobile Smart Phone Once the WIFI camera APP is installed and configured on the mobile smart phone use these icons to navigate and control the WIFI camera APP. On the App, tap and select the icon in the upper right corner for video recording and/or photographs to be stored on the camera MicroSD/TF (TransFlash) card.
WIFI APP FILE MANAGEMENT the APP, tap and select the to enter FM (file management) mode. Files on the mobile phone and camera can be viewed (open), saved, shared, or deleted. Switch between files located on camera or smart mobile phone by toggling between the camera or phone icons. Clicking upper right corner “edit”...
TROUBLESHOOTING Please refer the solutions below if there are any problems under normal operations : Can’t take photo/video. Check the memory of Micro SD card. “File error” shows up when playback photos and videos. Cause by mistakenly storage, use format function formating Micro SD card or change to proper type MicroSD card.