Basic Operation - NEO Venture User Manual

BASIC OPERATION

Insert micro SD card (class 4 or higher).
Insert battery into the camera (open door located on the bottom of the camera). Ensure that the battery contacts
are lined up correctly. The battery may need to be charged prior to use (see BATTERY page 13).
Press and hold the PHOTO/POWER button for 3 seconds to turn on the camera
After your camera is on, press the PHOTO button to take photos. Photo taking can also can be controlled by the
PHOTO button on the remote controller. You can also take photos while video recording.
After the camera is on, press the video button to record video. Video record can also be controlled by the video
button on the remote controller.
After your camera is on press the photo button to take photos. Photo taking can also be controlled by the photo
button on the remote controller.
One Button Back Mode: When you are setting menu or reviewing files, press VIDEO button once.
Play Mode: Recorded video files can be loaded for playback by touching the button in the lower right corner of
the touch screen. Scroll through the files by touching the arrow keys on the left side. Select the file for play back
by touching on the file on the touch screen. To pause and/or resume playback touch directly on the touch
screen.
Menu Operate: Press M button to enter settings menu. Press M to navigate to settings from Movie Mode to
Playback, Media Tool, and General Settings. Select the settings options shown on screen by touching the
option shown on screen. Use return button on upper right to exit settings menu.
Digital Remote Controller: (rechargeable)
Press and hold the power button on the remote controller to turn on. Press the video button on remote controller
until camera begins recording. There will be a 2 second delay before recording. The digital display on the
remote controller will begin counting when video recording starts.