Security Settings - Lenovo EZ Media & Backup Center User Manual

Security Settings

Only administrator users can view or change settings on the EZ Media, To change any security settings,
you must login to the device management interface as an admin user.
1. Click the Security icon to open the Security settings page.
2. Set the encryption options you want to use.
Local Encryption enforces encryption on your local network.
Remote Encryption enforces encryption outside your local network, such as through the
internet,
Choices for both encryption types are Not required and Always (encryption is always enforced).
Always encrypting communication is safest, but can impact performance.
Encryption is always available when you access your EZ Media using https.
3. If you have your own security certificate, you can load it by selecting Use an imported certificate
and browsing to the certificate to load it.
Browser communications with the EZ Media are encrypted as part of the built-in security
on the device. If you do not have your own security certificate, each computer that
attempts to access the EZ Media may encounter a security warning, which can be safely
ignored. In addition, you may be asked to accept a signed certificate for the EZ Media ,
which you should accept. If you change the device name at a later date, these warnings
may appear again.
4. Click Apply to save your changes.
5. Click here to learn how to create users on the device.
6. Click here to learn how to change access permissions for device Shares.
Securing Your EZ Media & Backup Center and Contents
Security Settings 26