SECTION 2
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
2-1. SLIDING PANEL ASSEMBLY
4 Flat type cable (19 core)
Slide mechanism
1 Push the OPEN/CLOSE button to
open the Sliding panel assembly.
×
2 Screw (BVTP 3
8)
5 Sliding panel assembly
3 Holder level
• NOTE FOR INSTALLATION (LEVEL SLIDER)
(Perform this DISASSEMBLY after the front panel is removed.)
1 Screw (BVTP2.6 × 8)
8 Remove the Level slider direction of arrow.
3 Top bracket
4 Four screws
2 Screw
(BVTP2.6 × 8)
(BVTP2.6 × 8)
a
b
7 Holder (R) assembly
5 Holder (L) assembly
a
b
6 Four screws (BVTP2.6 × 8)
NOTE :
Attach in the reverse order, but make sure the rollers ( a , b ) of the
holder (L) assembly and holder (R) assembly fit into the grooves of
the level slider.
— 5 —