Sony STR-DE825 Service Manual

SERVICE MANUAL
Dolby Laboratories Licensing Corporation.
"DOLBY" the double-D symbol a "AC-3" and "PRO LOGIC"
are trademarks of Dolby Laboratories Licensing Corporation.
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from 20 - 20,000 Hz; rated
100 watts per channel minimum RMS power, with no more than
0.09% total harmonic distortion from 250 milliwatts to rated output
(USA model only).
Amplifier section
POWER OUTPUT
Stereo mode
(8 ohms 20 Hz - 20 kHz, THD 0.09%)
100 W + 100 W
Surround mode (8 ohms at 1 kHz, THD 0.8%)
Front: 100 W/ch
Center a) : 100 W
a)
Rear : 100 W/ch
a) Depending on the sound field settings and the source, there may be no
sound output.
Dynamic power output
155 W + 155 W, 8 ohms
220 W + 220 W, 4 ohms
Harmonic distortion at rated output
Less than 0.09% (with sound field, tone, and bass
booster bypassed)
Frequency response
PHONO: RIAA
equalization curve
±0.5 dB
CD, TAPE, MD/DAT, TAPE/MD, DVD/LD, TV/DBS,
VIDEO 1 and VIDEO 2 :
10 Hz - 50 kHz +0.5/-2 dB (with sound field, tone,
and bass booster bypassed)
MICROFILM
STR-DE825/V818
Photo : STR-DE825
SPECIFICATIONS
Inputs (Analog) PHONO:
Sensitivity: 2.5 mV
Impedance: 50 kilohms
b)
S/N : 75 dB (A, 2.5 mV
CD, DVD/LD, TAPE, MD/DAT, TAPE/MD, TV/DBS,
VIDEO 1 and VIDEO 2 :
Sensitivity: 150 mV
Impedance: 50 kilohms
S/N b) : 82 dB (A, 150 mV
b)78' IHF
c) Weighted network, input level
Inputs (Digital) DVD/LD (coaxial):
Sensitivity: -
Impedance: 75 ohms
S/N: 100 dB (A, 20 kHz LPF)
DVD/LD, TV/DBS, MD/DAT (Optical):
Sensitivity: -
Impedance: -
S/N: 100 dB (A, 20 kHz LPF)
Outputs TAPE, MD/DAT, TAPE/MD, (REC OUT); VIDEO 1, 2
(AUDIO OUT):
Voltage: 150 mV
Impedance: 10 kilohms
WOOFER:
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low - and high-impedance headphones
FM STEREO FM-AM RECORDER
US Model
Canadian Model
E Model
Australian Model
STR-DE825
Chinese Model
STR-V818
c)
)
c) )
— Continued on next page —