Loading Originals On The Platen Glass - Canon MG3500 Series Online Manual

Loading Originals on the Platen Glass

You can load originals to copy or scan on the platen glass.
1. Load an original on the platen glass.
(1) Open the document cover.
(2) Load the original WITH THE SIDE TO SCAN FACING DOWN on the
platen glass.
Originals You Can Load
Align the corner of the original with the alignment mark
Important
Be sure to observe the following when loading the original on the platen glass.
- Do not place any objects weighing 4.4 lb (2.0 kg) or more on the platen glass.
- Do not put any pressure of 4.4 lb (2.0 kg) or more on the platen glass, such as
pressing down the original.
Failure to observe the above may cause the scanner to malfunction or the platen
glass to break.
The machine cannot scan the shaded area
of the platen glass).
.
(A) (0.04 inches (1 mm) from the edges
86