Environment Temperature; Single Data Clearing - KUNTENG KT-LCD3 Product User Manual

When the motor operating temperature exceeds the warning value, temperature
display flashes to alarm, meanwhile the motor controller will offer the appropriate
protection to motor.
○

Environment Temperature

After startup, the environment temperature for using meter will be displayed in
environment temperature display column.
The temperature display value may be in deviation shortly after boot-up, and the
display value will be gradually approaching the environment temperature within 10
minutes after boot-up.
○

Single Data Clearing

5 seconds after the meter is powered on, at display 1, hold both the
and the button (DOWN) simultaneously for about 2 seconds, the single trip time
(TM) and single trip distance (DST) flicker, then hold
record contents of both will be cleared.
Under the status of data flashing, if there were no operations on the data within 5
ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
Motor operating temperature
Environment temperature display
Single data clearing display
button shortly (SW), the
- 15 -
button (UP)