Configuring Redundant Recording - First Alert DVRAHD-0810 User Manual

RECORDING SETTINGS
Configuring Redundant Recording and Capture
Before you start
Storage mode in HDD Advanced Settings must be set to
Group before the HDD Property can be set to Redundant.
Redundant recording and capture enhances data safety and
reliability. To configure, enter the HDD Information interface:
Menu > HDD. Select the HDD and click
1. Set HDD Property to Redundancy.
2. Click Apply.
3. Click OK.
NOTE :
You must set the Storage mode in the HDD advanced
settings to Group before you set the HDD property to
Redundant. There should be at least another HDD
which is in Read/Write status.
Enter the Record Setting interface: Menu > Record > Encoding.
.
1. Select Record.
2. Select Camera to configure from dropdown list.
3. Check Redundant Record.
4. Click Apply.
If the encoding parameters can also be used to other
channels, click Copy and choose the channel you want to
apply the settings.
Page 34