Replacing The Cutting Blade; Cleaning Air Filter; Fuel Cap; Changing Engine Oil - Homelite HLM140SP-A User Manual

EN
FR DE ES IT
with rags and other material when performing
blade maintenance. Improper handling of blade
WARNING
REPLACING THE CUTTING BLADE (Fig. 8)
Replace a bent or damaged blade immediately.
WARNING
manufacturer of your mower. Using a blade not
approved by the manufacturer of your mower
WARNING
Drain the fuel first before tilting the mower to
replace the blade.
direction as viewed from the bottom of the mower.
blade.
installed with the curved ends pointing up toward the
on the shaft. Finger tighten the bolt by turning in a
mower.
NOTE:
order in which they were removed.
Torque the blade bolt down using a torque wrench
The recommended torque for the blade bolt is
NOTE:
REPLACING WHEELS (Fig. 9)
To replace a wheel:
PT NL SV DA NO FI
English (Original instructions)
HU CS RU RO PL SL
wheel.
Replace with new wheel and reinstall nut to secure.
CLEANING AIR FILTER (Fig. 10)
clean.
with your thumb while gently pulling on the cover.
Rinse and let dry completely.
squeeze it out using an absorbent cloth or paper towel.
NOTE:
performance.

FUEL CAP

WARNING
replaced immediately.
performance. If performance improves when the fuel cap
fuel cap if required.
CHANGING ENGINE OIL (Fig. 11)
Tip mower onto its side and allow oil to drain from the
instructions in the Adding/Checking Oil section.
NOTE: Used oil should be disposed of at an approved
disposal site. See your local oil retailer for more information.
SPARK PLUG MAINTENANCE (Fig. 12)
deposits in order to ensure proper engine operation. To
18
HR ET LT LV SK BG