Fueling And Refueling; Filling The Tank; Adding/Checking Engine Oil; Starting The Engine - Homelite HLM140SP-A User Manual

EN
FR DE ES IT
at least 15 m from the operating area.

FUELING AND REFUELING

WARNING
flammable.
purpose.
while refueling or handling fuel.
immediately.
Clean up spilled petrol immediately.
FILLING THE TANK (Fig. 3)
WARNING
a machine with a running or hot engine. Move
at least 9 m from refueling site before starting
WARNING
Clean surface around fuel cap to prevent contamination.
petrol from escaping around the cap. Rest the cap on
a clean surface.
container caps securely.
Wipe up any petrol spillage. Move 9 m away from
refueling site before starting engine.
NOTE:
ADDING/CHECKING ENGINE OIL (Fig. 3)
NOTE:
PT NL SV DA NO FI
English (Original instructions)
HU CS RU RO PL SL
the engine and should not be used.
To add engine oil:
is clean.
Remove the cap and seal from oil bottle provided.
NOTE:
To check engine oil:
is clean.
STARTING/STOPPING THE MOWER (Fig. 3)
WARNING
Never start or run the engine inside a closed or
poorly ventilated area; breathing exhaust fumes

STARTING THE ENGINE

Firmly push the primer bulb 3 times.
NOTE: This step is not usually necessary when starting
an engine that has already run for a few minutes.
Hold the operator presence control bar down against
the handle.
Pull the starter cord until the engine runs. Release the
NOTE: It may be necessary to repeat priming steps in
repeat priming steps.
STOPPING THE ENGINE
Release the operator presence control bar and allow
the engine comes to a complete stop.
SETTING BLADE HEIGHT (Fig. 4)
for your lawn. The average lawn should be between
16
HR ET LT LV SK BG