Rigging And De-Rigging; To Attach The Wings To The Skyranger; To Remove The Wings From The Skyranger - Aeros SkyRanger Operator's Manual

7.

Rigging and De-rigging

7.1

To attach the wings to the Skyranger:

 With the wing tip raised to approximately the rigged height, slide
the wing root into place to engage in the root brackets.
 Insert the wing root fixing bolts
 Attach the lift struts and jury struts
 Tighten all attachment bolts and insert safety rings
 Connect flap pushrod
 Connect Pitot line
 Connect aileron cables
 Ensure aileron cables are crossed as per placard in cockpit on
central upright.
 Final inspection of all nuts and bolts, cable routing and
attachments
7.2

To remove the wings from the Skyranger:

 Disconnect aileron cables
 Disconnect pitot line
 Disconnect flap pushrods
 Remove safety rings from lift strut bolts
 Remove nuts from lift strut bolts and spar bolts
 Support wing tip
 Remove lift struts
 Remove spar bolts (wing root)
 Slide wing outwards until spar is clear of cabin.
7.3 The tail plane is not designed to be a regular de-rig item, however it
may be removed for long distance trailering, as may the rudder. When
re assembling these parts replace all Nyloc nuts that were removed for
disassembly.
Skyranger Operators Manual, Issue 3, Feb 2011
21